Tamiya Truck Multi-Function Control Unit - 79-T56511

Offers 24 radio-controlled sounds, 9 different types of lights and vibration synchronized with engine sound.The Trinity of Sounds, Lights, and Vibration creates Maximum Authenticity.

Electrical Effect: (20 LED for 9 light functions)

All lamps employed with the multi function unit are high brightness type LED. They are employed to reproduce headlights, position lamps, roof lamps, speed indicators, fog lamps, back lamp, tail lamps and blinkers/hazard lamps, which can be turned on/off with the transmitter.

• Head light
• Fog lamp
• Roof lamp
• Speed indicator
• Turn signals
• Hazard lamp
• Tail lamp
• Back lamp
• Aux light

Sound Effect: (24 Radio-Controlled Sound Effects)

• Alarm
• Engine starter
• Idling
• Air dryer
• Revving
• Running without semi-trailer
• Running with semi-trailer
• Coupler attachment Coupler detachment
• Down-shifting
• Up-shifting
• Air discharging 1
• Air discharging 2
• Exhaust brake
• Brake
• Short horn
• Continuous horn
• Turn signal 1
• Turn signal 2
• Hazard
• Back alarm
• Parking brake
• Engine stop
• Alarm 2

Optional Parts Usable Simultaneously:

• Item: 56502 Semi-trailer Light Set
• Item: 56505 Motorized Support Legs
• Note:Tractor Truck Electrical Unit Set(Item: 56501),Tractor Truck Sound Effect Set,and Components included in these items cannot be uesd with or substituted for this unit.

Notes:

• Always use 540 Type motor included in kit otherwise the electronic speed controller in the MFC-01 Unit may malfunction.
• With some chassis, back lamp, front and rear auxiliary lights, and/or speed indicator cannot be turned on.
• Some chassis require extra holes for installation. Use 4mm pin vise for making holes.

Required RC System

• 4 Channel transmitter (self-neutral stick type with 4 channel trims), a 4ch-receiver and 2 servos (3 servos are required when installing 56505 Motorized Support Legs). No electrical speed controller is required as MFC-01 Unit covers that function.Receiver battery (6V) is not required.
• Transmitter which feature click-touch type trims may cause difficulty when using with tamiya Multi-Function Units.
• Some connectors may not be compatible.Modification may be required.
• Wheel trigger type transmitter or one without trims should not be used at all.
• PCM receiver , multi-channel receiver and the older SANWA receivers (with black case) are not available for this kit.
• When installing MFC-01 Unit into conventional truck models, servo extension cables may be required. Use extension cables (sold separately) so that overall cable length becomesmore than 50cm